Shapes

Specialty FabricationShapes.

Reference our guidelines for information on available triangle, radius and non-radius shapes and other shape options.

There must be a minimum of a 24″ diagonal on all sizes
One dimension can be less than 17″, down to 12″, if the other dimension is at least 21″ (i.e., 12″ x 21″)
Right Triangles = 24″ x 12″ block
With triangles, one leg must always be at least 24″ and the other leg cannot be less than 12″
Triangles should not exceed a 5:1 ratio
Triangle Point Tolerance:
Width measurement across must be at least 3/8“
When designed with a 3/8″ or less width across the point, the point may be broken off during manufacturing
This is considered within the tolerances up to the 3/8″ width